Find Out More

 

Just about every person has got their own individual theory in relation to What Would Cause My Electric Water Heater to Stop Working?.

Numerous modern-day houses use an electric water heater for their heating system, due to its ease and convenience of use. However, similar to any other electric appliances, problems might develop with its use, suddenly. It can be really irritating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm adequate and even too warm. Whatever the instance might be, water heater troubles can be fairly stressful. The good news is, we have actually made a listing of feasible remedies to your hot water heater issues. There are a number of variables that might trigger much of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it taken care of ought to not position too much of a problem if you follow these steps:

 

Call A Professional:

If after changing all malfunctioning parts and also resetting your temperature level, the water heater still isn't functioning, you might need to contact an expert plumber for a specialist opinion. The trouble with your heater could be that the cold and hot taps have been switched or it may be undersized for the quantity of hot water required in your home. Whatever the situation may be, a specialist plumber would aid solve the issue.

 

Examine Your Power Supply:

As fundamental as this might seem, it is extremely required. Without ample power, your water heater will not operate. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the problem, merely transform it off and on once again. Change any kind of broken or damaged fuse. Test the home appliance with power after these adjustments to see if it's now working.

 

Inspect Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't hot sufficient, you may need to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the accessibility panel as well as press the red switch for temperature level reset above the thermostat. This ought to aid warm the water. Turn the circuit breaker back on and check if the problem has been fixed.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power issue, after that attempt checking out your heating element if it is still working. Check each of your burner to make sure the trouble isn't with any of them. If any one of them is malfunctioning, change that component and then examine whether the hot water is back on.

 

Final thought

Water heater issues are not always major. A lot of them are because of minor problems like a blown fuse or worn-out heating element. Changing the damaged components need to suffice. Nonetheless, if you are still not able to address the trouble, give a call to your nearby plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I have been very occupied with Hot Water Heater Repair and I really hope you appreciated the new article. Do you know about somebody who is involved in the niche? Do not hesitate to promote it. Thanks for taking the time to read it.

Request Service